Dage MTI DC-330 3CCD Color Digital Camera with Controller and Cables
Dage MTI DC-330 3CCD Color Digital Camera with Controller and Cables
$2,500.00
- Order within
Dage MTI DC330 3 Chip Digital Camera
This camera for microscopes is brand new and in its original packaging!
Â
This Dage MTI camera is brand new, old stock. It has been tested for good working order and comes complete with Camera, Digital Camera Controller, power cord, camera cable (18-pin to 18-pin), RGB cable and S-Video cable. Original documentation and manual are included.Â
- 10-bit, digital processing - Resolves more grey and color information
- Resolution up to 750 TV lines
- On-chip integration to 8 seconds (256 frames)
- Ideal for use in fluorescence microscopy
- Digital horizontal and verticle detail enhancement
- On screen programming for 41 internal camera functions
- Three user-defined memories retain camera settings
- Camera for microscope features an RS-232c interface
- Automatic color shading correction
- RGB, Y/C, NTSC, or B/W video outputs
Dage MTI Specifications
Imaging Elements | 1/3", 410,000 pixel, microlens interline CCD (x3) | |
Effective Pixels | 768 (H) x 494 (V) | |
Resolution | Color Y/C | 750 TV lines |
RGB | 570 TV lines | |
Monochrome | 750 TV lines | |
Signal-to-Noise Ratio | 62 dB / 10 bit DSP circuitry | |
Minimum Subject Resolution | 8 lux @ f2.2, +18 dB gain, 50 IRE output | |
Scan Frequency | 15.734 kHz horizontal, 59.94 Hz vertical | |
Scan Type | 2:1 interlaced, NTSC | |
Inputs/Outputs | RGB, Sync out | 9 pin |
Y/C out, B/W out | 9 pin, S video 4 pin | |
NTSC, B/W out | BNC | |
Sync in | 9 pin, BNC | |
Output Impedance | 75 ohms | |
Synchronization Method | Internal or external (automatic switching) | |
White Balance | Manual, auto, or auto tracking | |
Electronic Shutter Settings | 8 step manual to 1/10,000 second Auto shutter to 1/50,000 second |
|
Manual Gain | 1 dB increments to +18 dB | |
AGC | Maximum selectable for +3, +6, +9, +12, +18 db | |
Horizontal Detail Frequencies | Low=2.8 mHz, Norm=3.5 mHz, High=4.2 mHz | |
Operating Temperatures | -10 degress C tp +50 degrees C | |
Operating Humidity | 30% to 90% | |
Dimensions | Head: 32mm (W) x 41mm (H) x 40mm (D) CCU: 110m (W) x 40mm (H) x 155mm (D) |
|
Weight | Head: 2.1 ozs., CCU: 1.47 lbs | |
Lens Mount | 16mm C mount | |
Power Supply Unit | 12 VDC at 700 mA |
Dage MTI DC330 3 Chip Digital Camera
This camera for microscopes is brand new and in its original packaging!
Â
This Dage MTI camera is brand new, old stock. It has been tested for good working order and comes complete with Camera, Digital Camera Controller, power cord, camera cable (18-pin to 18-pin), RGB cable and S-Video cable. Original documentation and manual are included.Â
- 10-bit, digital processing - Resolves more grey and color information
- Resolution up to 750 TV lines
- On-chip integration to 8 seconds (256 frames)
- Ideal for use in fluorescence microscopy
- Digital horizontal and verticle detail enhancement
- On screen programming for 41 internal camera functions
- Three user-defined memories retain camera settings
- Camera for microscope features an RS-232c interface
- Automatic color shading correction
- RGB, Y/C, NTSC, or B/W video outputs
Imaging Elements | 1/3", 410,000 pixel, microlens interline CCD (x3) | |
Effective Pixels | 768 (H) x 494 (V) | |
Resolution | Color Y/C | 750 TV lines |
RGB | 570 TV lines | |
Monochrome | 750 TV lines | |
Signal-to-Noise Ratio | 62 dB / 10 bit DSP circuitry | |
Minimum Subject Resolution | 8 lux @ f2.2, +18 dB gain, 50 IRE output | |
Scan Frequency | 15.734 kHz horizontal, 59.94 Hz vertical | |
Scan Type | 2:1 interlaced, NTSC | |
Inputs/Outputs | RGB, Sync out | 9 pin |
Y/C out, B/W out | 9 pin, S video 4 pin | |
NTSC, B/W out | BNC | |
Sync in | 9 pin, BNC | |
Output Impedance | 75 ohms | |
Synchronization Method | Internal or external (automatic switching) | |
White Balance | Manual, auto, or auto tracking | |
Electronic Shutter Settings | 8 step manual to 1/10,000 second Auto shutter to 1/50,000 second |
|
Manual Gain | 1 dB increments to +18 dB | |
AGC | Maximum selectable for +3, +6, +9, +12, +18 db | |
Horizontal Detail Frequencies | Low=2.8 mHz, Norm=3.5 mHz, High=4.2 mHz | |
Operating Temperatures | -10 degress C tp +50 degrees C | |
Operating Humidity | 30% to 90% | |
Dimensions | Head: 32mm (W) x 41mm (H) x 40mm (D) CCU: 110m (W) x 40mm (H) x 155mm (D) |
|
Weight | Head: 2.1 ozs., CCU: 1.47 lbs | |
Lens Mount | 16mm C mount | |
Power Supply Unit | 12 VDC at 700 mA |