VWR VistaVision Illuminator LED Upgrade Kit
- SKU: 11244
This LED illuminator is designed specifically for the VWR VistaVision microscope, and replaces all existing electronics. If you have a VWR VistaVision with failed circuit board, rheostat, or socket this is the perfect solution It provides brighter illumination while being more energy efficient. You can install this yourself, or we can install this into your microscope for an additional cost.
- Custom-designed to fit the VWR VistaVision inverted microscope and other models using the pictured OEM illuminator.
- Due to the convenient location of the illuminator on the inverted and metallurgical microscopes, the standard location for the intensity adjustment is on the illuminator housing. Remote intensity control is still an option. Contact us if this is desired.
- Easy installation – just loosen the thumb screw holding the original illuminator, remove it, replace with the new Nanodyne illuminator and tighten the thumb screw. Plug in the power supply and it is ready to use.
- All illuminator systems are backed by our 3-year warranty.
- Illuminator Dimensions: 2.45 x 3.01 x 2.10 inch
- Power Requirements: 5 to 24V/3.5W
- Brightness: 410 lm
- LED Expected Lifetime: 80% original brightness at 88,500 hours
- Material: Machined 6061 T6 Aluminum
This LED illuminator is designed specifically for the VWR VistaVision microscope, and replaces all existing electronics. If you have a VWR VistaVision with failed circuit board, rheostat, or socket this is the perfect solution It provides brighter illumination while being more energy efficient. You can install this yourself, or we can install this into your microscope for an additional cost.
- Custom-designed to fit the VWR VistaVision inverted microscope and other models using the pictured OEM illuminator.
- Due to the convenient location of the illuminator on the inverted and metallurgical microscopes, the standard location for the intensity adjustment is on the illuminator housing. Remote intensity control is still an option. Contact us if this is desired.
- Easy installation – just loosen the thumb screw holding the original illuminator, remove it, replace with the new Nanodyne illuminator and tighten the thumb screw. Plug in the power supply and it is ready to use.
- All illuminator systems are backed by our 3-year warranty.
- Illuminator Dimensions: 2.45 x 3.01 x 2.10 inch
- Power Requirements: 5 to 24V/3.5W
- Brightness: 410 lm
- LED Expected Lifetime: 80% original brightness at 88,500 hours
- Material: Machined 6061 T6 Aluminum