Olympus SZX-ILLK Illuminator LED Upgrade kit

Recently viewed

Olympus SZX-ILLK Illuminator LED Upgrade kit
Olympus SZX-ILLK Illuminator LED Upgrade kit

Olympus SZX-ILLK Illuminator LED Upgrade kit

  • SKU: 11270
$532.25
Quote Request

This LED illuminator is designed specifically for the Olympus SZX-ILLK microscope, and replaces all existing electronics. If you have a SZX-ILLK with failed circuit board, rheostat, or socket this is the perfect solution It provides brighter illumination while being more energy  efficient. You can install this yourself, or we can install this into your microscope for an additional cost.

  • Custom-designed to fit the form factor of the Olympus SZX-ILLK.
  • The SZX-ILLK OEM lamp house has two pins on either sides of the bulb (similar to BX40). However, the pin spacing (center to center) is 36mm (1.42 in) which is the spacing for the BH-2 and few more of that type including CK2. While the BX40/41, CK40 and CKX41 use the same pins but has a spacing of 37mm (1.457 in).
  • Remote adjustment on an existing control on the microscope is standard. Brightness control potentiometer on the new illuminator available on request.
  • Easy installation with instructions and most tools provided.
  • All illuminator systems are backed by our 3-year warranty.
  • Illuminator Dimensions: 2.45 x 2.45 x 2.36 inch
  • Power Requirements: 5 to 24V/3.5W
  • Brightness: 410 lm
  • LED Expected Lifetime: 80% of original brightness at 88,500 hours
  • Material: Anodized 6061 T6 Aluminum

This LED illuminator is designed specifically for the Olympus SZX-ILLK microscope, and replaces all existing electronics. If you have a SZX-ILLK with failed circuit board, rheostat, or socket this is the perfect solution It provides brighter illumination while being more energy  efficient. You can install this yourself, or we can install this into your microscope for an additional cost.

  • Custom-designed to fit the form factor of the Olympus SZX-ILLK.
  • The SZX-ILLK OEM lamp house has two pins on either sides of the bulb (similar to BX40). However, the pin spacing (center to center) is 36mm (1.42 in) which is the spacing for the BH-2 and few more of that type including CK2. While the BX40/41, CK40 and CKX41 use the same pins but has a spacing of 37mm (1.457 in).
  • Remote adjustment on an existing control on the microscope is standard. Brightness control potentiometer on the new illuminator available on request.
  • Easy installation with instructions and most tools provided.
  • All illuminator systems are backed by our 3-year warranty.
  • Illuminator Dimensions: 2.45 x 2.45 x 2.36 inch
  • Power Requirements: 5 to 24V/3.5W
  • Brightness: 410 lm
  • LED Expected Lifetime: 80% of original brightness at 88,500 hours
  • Material: Anodized 6061 T6 Aluminum